Looking for some good 3D printing ideas for your cosplay? Well Comic-Con is just around the corner here in San Diego and we have some great ideas just to set you apart from the crowd.
Anduril – My Mini Factory
Anduril – the sword used by Aragorn in The Lord of the Rings Trilogy, is a great addition to your collection. The design is by Mieszko Lacinski at My Mini Factory and should be printed in 17 sections (roughly 5-6 printer beds).
We gave this one a try a few months back with success. You can print this with us starting at $200See in SD3D Store
Oathkeeper – My Mini Factory
Oathkeeper is one of two Valyrian steel longswords made from Ice in the Game of Thrones television series. The part prints in 9 pieces or roughly 3-4 beds.
We have yet to give this one a try but you can purchase it in our store starting at $135
As with all long pieces such as this, we suggest using a plastic weld instead of normal glue.See in SD3D Store
Storm Trooper – Thingiverse
Join the Dark Side! With this helmet you will be set for Comic-Con.
The part prints in 16 sections on roughly 8 printer beds. The design was by Geoff W. on Thingiverse
You can check this large print out at the SD3D Store starting at $400See in SD3D Store
Batman’s Cowl – My Mini Factory
I am VENGENCE, I am the NIGHT, I am BATMAN!!!!
This great design was by Carmelo Nazario over at My Mini Factory. It is one of the smaller prints listed on this and can be done with just a couple of printer beds.
Gladiator Helmet – My Mini Factory
When a Roman general is betrayed and his family murdered by an emperor’s corrupt son, he comes to Rome as a gladiator to seek revenge.
This design was by Alan Stanford over at My Mini Factory.
This print is fairly simple with minimal material used (compared to other helmets) in 8 parts. It can be purchased at SD3D starting at $300.00See in SD3D Store
Destiny Hand Cannon – My Mini Factory
Duke MK. 44 Hand Cannon from Destiny. This is a replica of the Duke MK. 44 Hand cannon from the latest game created by Bungie and Activision, Destiny, released on the 9th September 2014. Available on PS3, PS4, Xbox 360, and Xbox One.
Design by Kirby Downy on My Mini Factory. We have printed this guy and are offering it in our store starting at $225.
Malcolm Reynolds Firefly Pistol – My Mini Factory
This cult classic TV show turned into movie just wont die. Be the cool guy at Comic-Con by being Nathan Fil… I mean Malcolm Reynolds.
Printed in 8 parts on roughly 3 beds. This design was done by Nathan Light at My Mini Factory.
Han Solo Blaster – My Mini Factory
No Star Wars outfit would be complete without a blaster – especially Han Solo’s.
This part was broken down for easy printing by Alan Stanford at My Mini Factory.
4. Accessories and Other Ideas
Pokeball – Thingiverse
Fulfill your childhood dreams of becoming a Pokemon Master with this full sized Pokeball! This model features a hinged lid that opens when the button is pressed and locks shut to allow you to store things inside the ball. It also includes a stand to display your Pokeball.
Design by Intentional3D on Thingiverse
Wearable Iron Man Arc Reactor – Thingiverse
Want to dress up a bit for Comic-Con but don’t want to overdo it? Well you can wear your normal outfit with this arc reactor below without any discomfort!
Just grab a few LEDs and follow the instructions.
Design by Misha Tikh on Thingiverse
Hadouken Fireball – My Mini Factory
Impress your friends with the Hadouken fireball. The perfect addition to your street fighter cosplay.
Design by Kirby Downey at My Mini Factory